Chassis

CNC-machined from high-strength aluminum, the best possible and effective protection for the clutch slave cylinder.   65SX  09-16

» All KTM handlebars are made from EN AW 7010 T6 aluminum » Position markings for simple setting » Including bar pad  ...

» Manufactured from highest grade aluminum » Optimally tuned steering stem stiffness » 100 % alignment of the fork tubes »...

DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest...

8 mm wider contact surface than standard. 125/150 SX  16 SX-F/XC-F   16

SXS.16.050.044 50SX  16 (CHAIN GUIDE NOT INCLUDED) SXS.11.050.044 50SX  09-15

KTM CNC parts are manufactured from high grade aluminum, which not only looks great but can also stand up to the toughest loads. The original factory look,...

Highest quality aluminum to withstand the toughest treatment and give your bike the factory look.   125/150 SX/XC   09-15 200...

DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest...

7 mm wider contact surface than standard. 125/150 SX  16 SX-F/XC-F   16

The integrated brake disc guard protects the rear brake disc from roost and other solid objects. The brake caliper support is lighter and stiffer than the...

HYDRAULIC CLUTCH COVER

Do you know that all KTM CNC parts are manufactured from highest quality aluminum,
and therefore, not only look good, they also withstand the toughest treatment?
With the anodized aluminum components in the original factory look from
the PowerParts range, you can turn your KTM into something very special.

sxs.05.450.230 Magura
250-525 SX-F / EXC 00 – 05
450 / 505 SX-F 06 – 08

HANDBRAKE CYLINDER AND HYDRAULIC CLUTCH COVER

Do you know that all KTM CNC parts are manufactured from highest quality aluminum,
and therefore, not only look good, they also withstand the toughest treatment?
With the anodized aluminum components in the original factory look from
the PowerParts range, you can turn your KTM into something very special.

sxs.05.450.210
SX / XC / XC-W / EXC
HANDBRAKE CYLINDER AND HYDRAULIC CLUTCH COVER

FACTORY FUEL TANK CAP

Do you know that all KTM CNC parts are manufactured from highest quality aluminum,
and therefore, not only look good, they also withstand the toughest treatment?
With the anodized aluminum components in the original factory look from
the PowerParts range, you can turn your KTM into something very special.

777.07.908.144
SX / XC 13-14

REAR BRAKE RESERVOIR CAP

Do you know that all KTM CNC parts are manufactured from highest quality aluminum,
and therefore, not only look good, they also withstand the toughest treatment?
With the anodized aluminum components in the original factory look from
the PowerParts range, you can turn your KTM into something very special.

u695.1981
SX / XC /XC-W / EXC 04 – 14

Do you know that all KTM CNC parts are manufactured from highest quality aluminum,
and therefore, not only look good, they also withstand the toughest treatment?
With the anodized aluminum components in the original factory look from
the PowerParts range, you can turn your KTM into something very special.

REAR BRAKE RESERVOIR EXTENDER
This rear brake reservoir cap has a larger volume
and additional cooling fins. This helps cool the brake
fluid and helps control fading in extreme conditions.

548.13.960.050
SX / XC / XC-W / EXC 04 – 14

Do you know about the special properties of carbon?
– Extremely light: about 80 % lighter than steel with the same load-bearing capacity
– Very stable: 4 times more resilient than aluminum
– Ultimate stiffness and strength
– Free from corrosion
– High continuous temperature resistance
– Low thermal expansion
– And, last but not least, a cool look
Check out your KTM with carbon components from KTM PowerParts.
They save weight and give the bike that factory look.

CARBON FORK GUARDS-SET
Optimum protection against stone impact.
Made to fit all 48 mm forks.

U690.7834
For 48 mm forks

STEP PLATE FOR SHIFTING LEVER

Do you know that all KTM CNC parts are manufactured from highest quality aluminum,
and therefore, not only look good, they also withstand the toughest treatment?
With the anodized aluminum components in the original factory look from
the PowerParts range, you can turn your KTM into something very special.

777.34.931.044
SX / XC / XC-W / EXC / SMR
5 mm wider contact surface than standard.

KTM 690 LC4 Renthal Handlebar
Used by KTM championship teams around the word. Orange anodized color available exclusively from KTM.

Renthal 604 bend, height: 99, width: 802, sweep: 54

Part Number: U690.9866

Fits: Enduro / SMC Models

KTM 690 LC4 Factory Knob Adjuster Set

Part Number: SXS.08.300.040

Fits: SM/SMC/Enduro

       Duke '08 - '10

Do you know about the benefits of a CNC-machined triple clamp? All KTM CNC-machined triple clamps have the following properties: – Manufactured from highest grade aluminum – Optimally tuned steering stem stiffness – 100 % alignment of the fork tubes – Perfect flexibility – adapted precisely to the KTM WP fork The factory triple clamp has the additional benefits of: – Fork clamping area machined after anodizing: With the same tightening torque, this increases the friction between triple clamp and fork tubes, and helps to prevent the fork tubes from twisting in the triple clamp. – The special steering stem bracket provides additional support for this feature. – Ultra-easy offset adjustment: removal of front wheel and fork is not necessary! The triple clamp offset is the distance between the horizontal center line of both fork tubes and the center of the steering axis, by which the fork tubes are offset from the steering axis (referred to as dimension “X”). The selected offset can be seen at a glance thanks to the marking on the triple clamp. Offset setting options: – Shorter offset: stability on fast straights – Longer offset: simpler and swifter steering into corners All KTM triple clamps are supplied with steering stem and with the steering head bearing already pressed on.

Part Number 781.01.999.020/04

Fits: SX/XC '14

Elegant anodized surface Visual highlight CNC milled aluminum triple clamp Optimally tuned steering stem stiffness 100% alignment of the fork...