FREERIDE

KTM 690 LC4 Factory Oil Plug. CNC-Machined design made of high-strength aluminum

Part Number: SXS.05.450.200

Fits: All

KTM Aluminum Handguards. Available in Orange and Black

These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar.

Includes mounting kit and orange deflector

Part Number: 765.02.979.000/30 - Black

                    765.02.979.000/04 - Orange

Fits: All Models

KTM Handlebar Support. Available in 4 sizes: 32MM, 37MM, 42MM, 47MM

Available in four different heights. Included in the kit are 2 x handlebar support lower parts and 2 x fastening bolts. The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.

Part Number: 789.01.939.044 - 32 MM

                    789.01.939.144 - 37 MM

                    789.01.939.244 - 42 MM

                    789.01.939.344 - 47 MM

Fits: Enduro / SMC Models

GRIP SET DUAL COMPOUND
The KTM 2K (2K= 2 different materials) grip combines the durability
of KTM standard grips and the comfort of the soft KTM grips.
– Harder orange material on the inside and at the grip
ends for a long service life
– Softer black material on the outside, where the
hand lies on the grip, for increased comfort

GRIP SET DUAL COMPOUND
The KTM 2K (2K= 2 different materials) grip combines the durability
of KTM standard grips and the comfort of the soft KTM grips.
– Harder orange material on the inside and at the grip
ends for a long service life
– Softer black material on the outside, where the
hand lies on the grip, for increased comfort

GRIP SET DUAL COMPOUND
Same as 630.02.021.100, but with open
grip ends for closed handguards or bar ends.

Part Number 630.023.021.200

GRIP HALF-WAFFLE SOFT
The special half-waffle grip has been developed to meet the demands and
preferences of our factory riders, with the clear objectives: comfort AND
safety – because no calluses on the palms and secure grip mean less
stress when riding.
The benefits:
– Ergonomic, contour matched to the shape of the hand for maximum comfort
– Small “half waffle” ribs on the rear for secure grip
– Made from two materials with different grades of hardness
– Available in two versions (soft and medium)
– Three areas for the metal safety wire

Part Number 548.02.021.000

GRIP HALF-WAFFLE SOFT
The special half-waffle grip has been developed to meet the demands and
preferences of our factory riders, with the clear objectives: comfort AND
safety – because no calluses on the palms and secure grip mean less
stress when riding.
The benefits:
– Ergonomic, contour matched to the shape of the hand for maximum comfort
– Small “half waffle” ribs on the rear for secure grip
– Made from two materials with different grades of hardness
– Available in two versions (soft and medium)
– Three areas for the metal safety wire

Part Number 548.02.021.100

GRIP DOUGHNUTS SET
Optimum protection against blisters on the
thumbs with these coated neoprene rings.
Simple to slide onto the grips.

Part Number u695.1716

HANDGUARDS
These handguards are an indispensable companion for serious offroad and supermoto
use. The wide, spacious design ensures excellent freedom of movement and maximum
protection against impact, flying stones, branches, etc. Supplied complete with the
components required for fitting to 22 and 28 mm diameter handlebars.

Part Number 603.02.179.000/04

RACING MIRROR LEFT
Light and robust.

502.12.040.000/30

STEERING DAMPER
Submount Stabilizer with three fully adjustable
circuits to help reduce rider fatigue, arm pump,
and allow the bike to track better over rough terrain.
Further benefits:
– Extremely low weight
– Away from center dampening circuit
– High and low speed setting adjustments
– Ideal setting range with 25 possible clicks
– Used by factory teams around the world

585.12.050.100

BRACKET FOR STEERING DAMPER
This post mount is needed for installation
of the 585.12.050.100 steering dampener.
Adjustable pin height for the perfect fit.

772.12.905.344

CLAMP FOR STEERING DAMPER

585.12.050.144
For OE Machined
Triple clamps 07 – 11
All OE Clamps
SX / XC / XC-W / EXC 12 – 14

STEP PLATE FOR BRAKE LEVER

Do you know that all KTM CNC parts are manufactured from highest quality aluminum,
and therefore, not only look good, they also withstand the toughest treatment?
With the anodized aluminum components in the original factory look from
the PowerParts range, you can turn your KTM into something very special.

548.13.951.100
SX / XC / XC-W / EXC / SMR
7 mm wider contact surface than standard.

HUB DECAL KIT
4 pieces 37 x 31 mm, 4 pieces 48 x 40 mm.

U695.1087

RIM STICKER SET
Orange, pre-cut sticker,
suitable for front and rear rim.

780.09.099.000
18"/21"; 19"/21"

RIM STICKER SET
Black / white, pre-cut sticker,
suitable for front and rear rim.

765.09.099.000
18"/21"; 19"/21"

GEAR SHIFT LEVER TIP CNC milled from high-strength aluminum Elegant anodized surface  

Ingenious: Footpegs that move with you when you shift your weight. Developed and tested by KTM professional riders. Ideal for all types of riding and...

  The repair kit contains everything you need to repair the bearing support in your wheel. FITS: F6001M8 85 SX 17/14 2013 2013...

More safety and stability at the fork when you’re riding at speed. The fully adjustable, very lightweight KTM steering damper is also unbeatable value...

Reinforcement for the rear end of your Freeride. Required when using universal rear bag 5 L 781.12.978.000.

This large-pored air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty...

* CLOSED CARTRIDGE FORKS/OPEN CHAMBER/ 4CS   Bleeder valves designed especially for WP forks. A quick press of the finger and the fork is bled....