Track my order(s)
Type the characters you see in the picture above.
Cart is empty
BRACKET FOR STEERING DAMPERThis post mount is needed for installationof the 585.12.050.100 steering dampener.Adjustable pin height for the perfect fit.
772.12.905.344
* CLOSED CARTRIDGE FORKS/OPEN CHAMBER/ 4CS Bleeder valves designed especially for WP forks. A quick press of the finger and the fork is bled....
Lighter and stiffer than the standard brake caliper support. The stiffness has a positive effect on as braking power and application. CNC-machined from...
720.10.961.000 85 SX 13 – 16 REAR BRAKE DISC GUARD Provides great coverage for the rear brake disc from stones and other solid objects. Made of...
700.10.060.000 85 SX 13 – 16 BRAKE DISC REAR 230 MM The larger diameter of this brake disc ensures even better braking power. Rear brake caliper...
Protects the rear brake disc from roost and other solid objects while maintaining minimal weight. Designed to fit on CNC brake caliper support...
720.09.961.000 85 SX 13 – 16 FRONT BRAKE DISC GUARD Very practical: The intelligent fitting system with a central adapter replaces the spacer sleeve...
» Prevents damage to the engine case in the event of the chain breaking » CNC-machined from high-strength aluminum » Best possible and...
The TM Designworks chain guide, as used by the KTM Factory Team: - CNC-machined from Teflon - With replaceable chain running surface, hence extremely...
Mount For SXS Steering Damper
CLAMP FOR STEERING DAMPER
585.12.050.144For OE MachinedTriple clamps 07 – 11All OE ClampsSX / XC / XC-W / EXC 12 – 14
720.02.903.000 65 SX 13-16 85 SX 13 – 16 HYDRAULIC CLUTCH COVER
700.13.903.000 65 SX 14-16 85 SX 13 – 16 HANDBRAKE CYLINDER COVER
This large-pored air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty...
FLEX BRAKE LEVER Precision made lever designed to bend forward in a spill. They have a long wearing delrin bushing assembly and adjustable lever position...
FLEX CLUTCH LEVER Precision made lever designed to bend forward in a spill. They have a long wearing delrin bushing assembly and adjustable lever position...
For protecting your frame without altering the slender profile of your bike. F7375N4 Freeride 250 R 2014 2014 USF7375O4 Freeride 250 R...
The repair kit contains everything you need to repair the bearing support in your wheel. FITS: F6001M8 85 SX 17/14 2013 2013...
GEAR SHIFT LEVER TIP CNC milled from high-strength aluminum Elegant anodized surface
GRIP SET DUAL COMPOUNDThe KTM 2K (2K= 2 different materials) grip combines the durabilityof KTM standard grips and the comfort of the soft KTM grips.– Harder orange material on the inside and at the gripends for a long service life– Softer black material on the outside, where thehand lies on the grip, for increased comfort
GRIP SET DUAL COMPOUNDSame as 630.02.021.100, but with opengrip ends for closed handguards or bar ends.
Part Number 630.023.021.200
GRIP HALF-WAFFLE SOFTThe special half-waffle grip has been developed to meet the demands andpreferences of our factory riders, with the clear objectives: comfort ANDsafety – because no calluses on the palms and secure grip mean lessstress when riding.The benefits:– Ergonomic, contour matched to the shape of the hand for maximum comfort– Small “half waffle” ribs on the rear for secure grip– Made from two materials with different grades of hardness– Available in two versions (soft and medium)– Three areas for the metal safety wire
Part Number 548.02.021.100
Part Number 548.02.021.000
KTM 690 LC4 Factory Oil Plug. CNC-Machined design made of high-strength aluminum
Part Number: SXS.05.450.200
Fits: All
KTM Handlebar Support. Available in 4 sizes: 32MM, 37MM, 42MM, 47MM
Available in four different heights. Included in the kit are 2 x handlebar support lower parts and 2 x fastening bolts. The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.
Part Number: 789.01.939.044 - 32 MM
789.01.939.144 - 37 MM
789.01.939.244 - 42 MM
789.01.939.344 - 47 MM
Fits: Enduro / SMC Models
KTM Aluminum Handguards. Available in Orange and Black
These handguards developed especially for KTM bikes are an indispensable companion for serious offroad and supermoto use. The wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar. Includes mounting kit and orange deflector
Part Number: 765.02.979.000/30 - Black
765.02.979.000/04 - Orange
Fits: All Models
GRIP DOUGHNUTS SETOptimum protection against blisters on thethumbs with these coated neoprene rings.Simple to slide onto the grips.
Part Number u695.1716
HANDGUARDSThese handguards are an indispensable companion for serious offroad and supermotouse. The wide, spacious design ensures excellent freedom of movement and maximumprotection against impact, flying stones, branches, etc. Supplied complete with thecomponents required for fitting to 22 and 28 mm diameter handlebars.
Part Number 603.02.179.000/04
The low suspension kits specially developed by KTM in collaboration with WP are the perfect compromise between maximum chassis performance and minimum...
The robust, waterproof rear bag can be fitted simply and without additional installation materials. The volume of the bag is approx. 5 l...
Ignition curve adjustment made easy! With this switch, you can change the ignition curve conveniently from the handlebar on models featuring a digital box...
RACING MIRROR LEFTLight and robust.
502.12.040.000/30
Ingenious: Footpegs that move with you when you shift your weight. Developed and tested by KTM professional riders. Ideal for all types of riding and...
Perfect protection for radiators. Simple fitting. F7375N4 Freeride 250 R 2014 2014 USF7375O4 Freeride 250 R 2015 2015 USF7375P4...
Reinforcement for the rear end of your Freeride. Required when using universal rear bag 5 L 781.12.978.000.
Pre-cut sticker, suitable for front and rear rim. 18"/21"; 19"/21"
RIM STICKER SETOrange, pre-cut sticker,suitable for front and rear rim.
780.09.099.000 18"/21"; 19"/21"
RIM STICKER SETBlack / white, pre-cut sticker,suitable for front and rear rim.
765.09.099.00018"/21"; 19"/21"
Orange anodized valve caps with valve opening function
Orange anodized valve caps.
» Made from 4 mm-thick, high-strength, robust aluminum » Side parts welded from inside and out » Extremely hard-wearing and...
The clamp and its plastic insert are designed in such a way that the brake and clutch controls twist in the event of a crash, thereby reducing the risk of a...
This rear sprocket not only looks cool, it also provides the following compelling benefits: – Manufactured from high-strength 7075-T6 aluminum, the...
STEERING DAMPERSubmount Stabilizer with three fully adjustablecircuits to help reduce rider fatigue, arm pump,and allow the bike to track better over rough terrain.Further benefits:– Extremely low weight– Away from center dampening circuit– High and low speed setting adjustments– Ideal setting range with 25 possible clicks– Used by factory teams around the world
585.12.050.100
More safety and stability at the fork when you’re riding at speed. The fully adjustable, very lightweight KTM steering damper is also unbeatable value...
STEP PLATE FOR BRAKE LEVER
Do you know that all KTM CNC parts are manufactured from highest quality aluminum,and therefore, not only look good, they also withstand the toughest treatment?With the anodized aluminum components in the original factory look fromthe PowerParts range, you can turn your KTM into something very special.
548.13.951.100SX / XC / XC-W / EXC / SMR7 mm wider contact surface than standard.
HUB DECAL KIT4 pieces 37 x 31 mm, 4 pieces 48 x 40 mm.
U695.1087